This translation is older than the original page and might be outdated. See what has changed.
You are here: start » en » centro » servizos » ubuntu_14.04_citius

Ubuntu 14.04 CITIUS Operating System

This is an old revision of the document!


FIXME This page is not fully translated, yet. Please help completing the translation.
(remove this paragraph once the translation is finished)

Ubuntu 14.04 CITIUS Operating System

Installation, maintenance and support of an Ubuntu 14.04 Operating System that has been customized for the CITIUS.

Installation in any computer connected to the CITIUS network can be requested trough https://citius.usc.es/dashboard/ requests and problem reporting form.

How to install additional software

Matlab and Maple

They both have their own installer. Search “install matlab” or “install Maple” in the program menu or execute the apropiate command: install-matlab_R2012a.sh, install-matlab_R2011a.sh, install-maple16.sh, install-maple17.sh.

Available software from repositories

First, check if the desired software is already in the repositories. The most reliable way of doing it is using the command line:

apt-cache search the_program_name

This will show a packet list with a small description. For a more detailed description of any of them, use:

apt-cache show the_packet_name

To install a packet, use the command:

aptdcon -i the_packet_name

To install more than one packet at the same time put their names between quotation marks:

aptdcon -i "packet_name other_packet_name"

Other interesting aptdcon options:

  • -c: Refresh the cache of available packets.
  • -u packet_name: updates a packet
  • --safe-upgrade: Update all packets
  • -r packet_name: Uninstalls a packet

Software not in repositories

If a program is not present in the configured repositories but is available in a compatible one, be it an Ubuntu official repository or a third-party one, it can be added to the configured list to make it available for all users. Request it using the https://citius.usc.es/dashboard/ requests and problem reporting form.

You can also compile and install from source any program if you use as prefix a directory in which you have write permissions like /home/local/user_name. Usually all programs allow specifying a custom installation prefix. Check the program documentation.

FAQ

How can I upgrade from Ubuntu 12.04 to 14.04

Please request it through the https://citius.usc.es/dashboard/ requests and problem reporting form. Specify a time and day for the upgrade. Nothing will be erased from your home (both the local and the remote) but any specific personalization stored in the system partition or any cron tasks will be lost.

Establish the session language

In Ubuntu 14.04 the session language can be stablished using the tool «Soporte de idiomas»(Language support). It can be found in the Ubuntu menu. To choose the default language for the current user drag and drop the chosen language to the top of the list. Only the Spanish, English and Galician languages are available and it is not allowed to install more.

The date and number format can be changed using the «Opcións rexionais»(Regional options) tab of this window.

Empathy does not support XMPP/Jabber accounts

The package account-plugin-jabber must be installed with

aptdcon -i account-plugin-jabber

.

Can other desktops be used, apart from Unity?

Other desktops can be installed using the Ubuntu Software Center or aptdcon. The following desktops are available:

  • GNOME Classic
    • Install the gnome-session-flashback package.
  • KDE
    • Install the escritorio-kde-minimo package for a very basic desktop.
    • Install the escritorio-kde-basico package for the basic desktop with the KDE basic applications.
    • Install the escritorio-kde-completo package for the desktop with all the available applications (be warned, they are A LOT).
  • LXDE
    • Install the lxde package.
  • I3-WM
    • Install the i3-wm, i3status and suckless-tools packages.
  • XFCE
    • Install the xfce4-session, xfce4-panel, shimmer-themes and optionally xfce4-goodies.
    • For a the fullest experience install xfce4-whiskermenu-plugin, xfce4-indicator-plugin and gtk-theme-config.

How can I install additional LATEX packages?

Any TeXLive package available in CTAN can be installed in your user home.

First install xzdec:

aptdcon -i xzdec

Then, only once, TexLive directories in your home must be initialized:

tlmgr init-usertree

After that, you can install any desired package. For example, to install pgfgantt:

tlmgr install pgfgantt

The flash plugin doesn't work in Firefox or a warning appears

First try to upgrade Flash manually. Execute the following commands in a terminal window:

aptdcon -c
aptdcon -u flashplugin-installer

If this doesn't fix the problem it is possible that the repository is out of date. Sometimes Firefox marks the Flash plugin as insecure and there is no current alternative.Then it is necessary to wait a few days for an update to appear.

I prefer the traditional scroll bars, can I have them back?

Then new scroll bars are called Overlay Scrollbars. To have the old ones back you need to uninstall the package overlay-scrollbar. If you later change your mind, it is enough to install that packet back.

aptdcon -r overlay-scrollbars

Problems printing PDF documents

Some documents, after being processed by the Evince reader, don't get printed correctly or leave the printer blocked. As an alternative the command lp can be used. It sends the document to the printer unprocessed. Without options lp uses the printer in your floor and prints the document single-sided.

lp -o sides=two-sided-long-edge example_file.pdf # prints double-sided
lp -P 12,15,17-20 example_file.pdf # prints only pages 12,15 e 17 a 20
lp -o number-up=4 -o fit-to-page -o number-up-layout=rltb example_file.pdf # prints 4 pages by sheet, top to bottom and left to right, scaling to fit the sheet size.
lp -d ctprints1  example_file.pdf # Prints in the basement printer
lpstat -a # Show the list of available printers

Unity hangs, ¿how can I recover the system without rebooting?

Some configurations, specifically those with low video memory, are prone to leave Unity unresponsive. In that event you can try to execute the command unity-reload by pressing Alt+F2. If that doesn't work, go to a terminal by pressing Control+Alt+F1, login and execute the command from there. To go back to the desktop press Alt+F7.

Install Roby, Python and R packets in the home directory

Ruby

gem install --user-install packet_name

Before the first time you must install ruby1.9.1-dev:

aptdcon -i ruby1.9.1-dev

When installing the first gem a warning to add a directory to the PATH will be issued. This must only be done the first time. For example:

WARNING:  You don't have /home/remoto/jorge.suarez/.gem/ruby/1.9.1/bin in your PATH,
	  gem executables will not run.

Add the necessary export command in your bashrc file with this command:

echo "export PATH=~/.gem/ruby/1.9.1/bin:$PATH" >> ~/.bashrc

This change won't have any effect until you open a new session unless you execute the quoted part of the previous command or the bash command in the current session.

Python

The recommended option is to install the Anaconda distribution. The advantage of this distribution is that it works from an user directory and lets the user have different installations with different versions of each packet. In the bin subdirectory you can find all the typical python executables, as well as the conda package manager which is simpler and more robust than pip.

If you prefer not to use Anaconda, you can still install packets with:

pip install --install-option="--user" packet_name

Before doing it for the first time you need to install python-dev:

aptdcon -i python-dev

R

Firdtly create a directory called R in your home:

mkdir ~/R

Run R and inside it use the packet installation command:

R
install.packages("packet_name")

You will be asked if you want to do it in ~/R because /usr/local/lib/R cant be written into. Answer y. The directory will be added to the library path and you will be able to load them.

When unblocking the screen after being idle it asks for the password twice

This happens in the default directory(Ubuntu) when inheriting the configuration from Ubuntu 12.04. Para solucioanrlo, basta con ejecutar este comando en una terminal:

dconf reset -f /org/compiz/

Tras cerrar sesión y volver a iniciarla, el problema debería desaparecer. Tan solo se perderán algunas configuraciones avanzadas del escritorio que es muy poco probable que hayas tocado.

Ó iniciar sesión o teclado cambia a inglés automaticamente

Esto é culpa de ibus. Podes desactivar ibus se non vas a usalo (se non sabes o que é, non o estás a usar). Para facelo, vai a Preferencias » Soporte de idiomas e no desplegable de método de entrada elixe Ningún.

Se precisas ibus, podes solucionar este problema editando a configuración de ibus como explica aquí.

A firma de actas da USC non funciona

Para que a firma de actas da USC funcione, debes utilizar Firefox, e ter instalado e funcionando Java 8 de Oracle:

aptdcon -i oracle-java8-installer

En Firefox, vai a Ferramentas » Complementos, e na sección Plugins, comproba que teñas activado o Java(TM) Plug-in 11.72.2 ou superior e que teñas desactivado calquera outro complemento de java, incluíndo o Icedtea.

Abre o Oracle Java 8 Plugin Control panel executando o comando

ControlPanel

na terminal e realiza os seguintes pasos:

  1. Borra os arquivos temporais, na primeira pestaña, botón Preferencias e logo no novo diálogo, Borrar arquivos….
  2. Engade os seguintes sitios á lista de excepcións na pestaña de Seguridade:
    • https://aplicacions.usc.es/
    • https://sec-virtual.usc.es/
    • https://*.usc.es/

Despois destes pasos, accede á firma de actas. O applet de proba non funciona, pero o applet de firma real si debería funcionar correctamente.